PCI-Clock 6039 DCF77
PCI-Clock 6039 DCF77 |
|
Ranges of
application
The model 6039 can be used as time standard in PCs with PCI-bus interfaces.
There are three different synchronisation possibilities for this board:
The board 6039 is plugged directly into a PCI space of a PC.
It serves for the synchronization of different data acquisition or recording systems. Main ranges of application are the synchronization of data networks, BDE-time registration or personal data systems. A direct access to the board enables the time output in msec.
There are driver software for Windows 95/98, NT, 2000, ME, NTP (Network Time Protocol) available.
General information about DCF77
Compatible GPS unit - Model 6039 GPS
| General | |
| PC board for the PCI bus | |
| Voltage supply for the board: | + 5 V DC / 0,31 A ± 5 % via PC bus |
| Temperature range: | 0 - 50° C for the specified data 0 - 70° C with reduced free-running characteristics |
| MTBF: | appr. 150,000 h |
| Receiver (Processor controlled AM / FM receiver DCF77) | |
| Input impedance receiver: | < 50 Ohm |
| Sensitivity: | 40 µV |
| Antenna | |
| Antenna types: | see DCF77 accessories |
| Antenna cable length: | max. 500 m antenna cable RG59 |
| Voltage supply for the antenna: | 5 V DC over the antenna cable potential free |
| Accuracy | |
| DCF77 reception: | ± 2 msec. |
| Free-running characteristics: | ± 2 ppm after VCO control at a constant temperature between +10°C and +50°C |
| Back-up clock: | ± 25 ppm from +10°C to +50°C |
| Interfaces | |
|
|
| Serial interface parameter | |
| Baud rates: | 150 - 9,600 baud |
| Stopbit: | 1 bit / 2 bit |
| Word length: | 7 bit / 8 bit |
| Parity: | no, even or odd |
| Additional components | see DCF77 accessories |
Current manuals in english and german language and remote/service software resp. driver for our systems can be found in the download area:
|
+++ selection+++ |
||
|
|
||
