PunktsoftwarePunktdriver hopf Elektronik GmbH

GPS and DCF77 Plug-In Board 6039, PCI 2.2 Bus (for 5V PCI slots)

Driver Updates

 

MS-Windows NT

    The software pool for the 6039 PC Board contains several packages:

    Punkthopf 6039 Driver
    The hopf 6039 driver is needed for communication between operating system and the PCI board and must be installed always.
    PfeilDownload Driver

    Punkthopf Management Console V01.06 (Firmware 01.02 or greater)
    The hopf Management Console (HMC) is used for configuration of the hopf 6039 and needs an already installed hopf 6039 driver to be able to communicate with the PCI board.

    Note: The HMC has been tested successfully on Windows NT 4.0 SP6 but we cannot provide support because Microsoft officially does not support Windows NT anymore.

    PfeilDownload Windows Installer (ca. 34 MB)
    PfeilDownload Documentation

    PunktPreconfigured NTP-Packages
    The NTP service/daemon retrieves the current UTC time from the PCI board, synchronizes the local computer and provides time to other NTP clients. The hopf 6039 driver must be already installed.
    PfeilREADME (german/english)
    PfeilDownload Windows Installer

    Punkthopf 6039 Programming Library 02.00
    The programming library can be used for integration of the hopf 6039 into custom software (C or Java). The hopf 6039 driver must be already installed to use the programming library.
    PfeilDownload Programming Library 02.00 (ca. 1,1 MB)

 

MS-Windows 2000 / XP / 2003 Server / Vista

    The software pool for the 6039 PC Board contains several packages:

    Punkthopf 6039 Driver
    The hopf 6039 driver is needed for communication between operating system and the PCI board and must be installed always.
    PfeilDownload Driver

    Punkthopf Management Console V01.06 (Firmware 01.02 or greater)
    The hopf Management Console (HMC) is used for configuration of the hopf 6039 and needs an already installed hopf 6039 driver to be able to communicate with the PCI board.
    PfeilDownload Windows Installer (ca. 34 MB)
    PfeilDownload Documentation

    PunktPreconfigured NTP-Packages
    The NTP service/daemon retrieves the current UTC time from the PCI board, synchronizes the local computer and provides time to other NTP clients. The hopf 6039 driver must be already installed.
    PfeilREADME (german/english)
    PfeilDownload Windows Installer

    Punkthopf 6039 Programming Library 02.00
    The programming library can be used for integration of the hopf 6039 into custom software (C or Java). The hopf 6039 driver must be already installed to use the programming library.
    PfeilDownload Programming Library 02.00 (ca. 1,1 MB)

 

Red Hat Linux

 

SuSE Linux

 

Other Linux Versions

    The software pool for the 6039 PC Board contains several packages:

    Punkthopf 6039 Driver Source Package
    The hopf 6039 driver is needed for communication between operating system and the PCI board and must be installed always.
    PfeilDownload Source Package

    Punkthopf Management Console V01.06 (Firmware 01.02 or greater)
    The hopf Management Console (HMC) is used for configuration of the hopf 6039 and needs an already installed hopf 6039 driver to be able to communicate with the PCI board.
    PfeilDownload Linux TAR.GZ
    PfeilDownload Documentation

    PunktNTP Source Package
    The NTP service/daemon retrieves the current UTC time from the PCI board, synchronizes the local computer and provides time to other NTP clients. The hopf 6039 driver must be already installed.
    PfeilDownload Source Package

    Punkthopf 6039 Programming Library 02.00
    The programming library can be used for integration of the hopf 6039 into custom software (C or Java). The hopf 6039 driver must be already installed to use the programming library.
    PfeilDownload Programming Library 02.00 (ca. 1,1 MB)
© by hopf Elektronik GmbH   -   Tel: +49 (0)2351 9386-86   -   Fax: +49 (0)2351 9386-93  -   E-mail: support@hopf.com